HYPR Face Mask Material Data Sheet
HYPR Mask face mask material is engineered using a patent-pending Nano-fiber technology by our material supplier and is highly-efficient (up to 95%) on sub-micron particles, including bacteria and viruses. You can download our full data-sheet by clicking here
Construction Details:
HYPR Mask Face Mask Material is constructed from polypropylene spun-bond non-woven with a Nano-fiber fine filtration layer and surface layer of polyester non-woven.
|
Style Number: (NP097) |
3-Layer lightweight composite filter media |
|
Description: |
Polypropylene/Nanofiber/Polyester composite filter media |
|
Finish: |
Sonic lamination |
Material Comparison:
When compared, HYPR Face Mask Material far exceeds standard cloth and fabric materials in efficiency percentage.
| Filtration Material | Filtration Rate |
| Polyester/Cotton Tights | 2.50% |
| Polyester Dress Shirt | 2.50% |
| Cotton Shirt | 9.30% |
| Polyester/Cotton Sewing Fabric | 10.40% |
| Microfiber Dish Towel | 14.50% |
| HYPR Face Mask Material | 95.00% |
|
Property |
Target |
Metric |
Test Method |
|
Weight |
2.06 - 2.36 |
oz/yd2 |
ASTM D461 |
|
n/a |
lb (lbs/3000ft2) |
TAPPI 410 |
|
|
Air Permeability |
28 - 35 |
ft3 /min/ft2 (cfm) @ .5” H2O |
ASTM D 737 (U.S.) |
|
140 - 180 |
l/dm2 /min @ 200 Pa |
DIN 53887 |
|
|
Thickness |
0.040 / 1.00 |
inches / mms |
TAPPI 411 |
|
Currugation Depth |
n/a |
inches / mms |
TAPPI 411 |
|
MERV Rating |
MERV 16 |
|
ASHRAE 52.2 |
|
Filtration Rating |
Ref. F7 |
Up to 95% efficient at 0.3 micron at 5.33cm/sec face velocity |
TSI 3160 |
|
Target Pressure Drop |
< 60 pascals |
Pascals at 5.33cm/sec face velocity |
TS1 3160 |
|
Tensile Strength (MD) |
n/a |
lbs/2" |
ASTM D-461 |
|
Process Data |
Roll length up to 1200 linear meters. Supplied on 76mm or 3.0” ID cores |
||
|
Applications |
Surgical face mask applications |
||
***Limitation of Liability - HYPR Mask will not be liable for any loss or damage coming from this product, whether direct, indirect, special, incidental or consequential. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Our materials are built by a company called Filti and you may find additional details at https://filti.com/